sensara sa inthanete, se sebedisa-purity sheet/ ring electrode tse phahameng tse nang le puseletso e kopantsweng ya mocheso wa Pt1000, IP68 e sa keneleng metsi le RS485 (Modbus-RTU) tlhahiso ya dijithale. E fana ka karabelo e tsitsitseng, e thibelang-polarization le{7}}thibela ts'ebetso e mpe, e loketseng{8}}ho hlahlobisisa nako ea 'nete ea conductivity & total dissolved solids (TDS) metsing a hloekileng, metsi a beelang, metsi a potolohang a pholileng, metsi a litšila a indasteri le metsi a leoatle. E ka hokahana hantle le PLC, DCS le MTWCON5300 conductivity controller, e nang le tlhahiso e ikhethileng ea 4-20mA ea analog.
MTW-ECPt Series Platinum-Cell Conductivity Probe ke tharollo ea tekanyo e phahameng ea-e tšepahalang ea liindasteri, e etselitsoeng ts'ebetso e tsoelang pele tikolohong e hloekileng ho isa ho e thata ea liindasteri. E sebelisa li-electrode tse phahameng-purity platinum (99.99% Pt) ho 2-pole (bakeng sa{8}}ho ea{10}}mid conductivity) le 4-pole (bakeng sa ultra{13}}low & high conductivity, anti{17}}polarization); li-cell constants li fumaneha K=0.01 (ultra-pure water), K=0.1 (pure water), K=1.0 (kakaretso ea metsi a liindasteri), K=10 (metsi a litšila a nang le letsoai le phahameng/metsi a leoatle) ho koahela tekanyo e felletseng ea litekanyo.
The built-in high-precision Pt1000 temperature probe enables automatic temperature compensation (0–80℃), complying with the IEC 60746 standard temperature reference (25℃). The housing is made of corrosion-resistant PPS/PEEK and 316L stainless steel with anti-fouling surface treatment, supporting long-term submersion or flow-through installation with 3/4" NPT standard thread. The 4-pole design effectively eliminates cable resistance, electrode polarization and fringe field errors, ensuring stable readings in high conductivity (>100 mS/cm) kapa conductivity e tlase (<0.1 μS/cm) media.
E ts'ehetsa{0}}point/2{2}}tekanyo ea ntlha e le 'ngoe ka litharollo tse tloaelehileng tsa KCl, e na le matla a ho lekanya data{3}ho tima polokelo le mesebetsi ea ho itlhahloba{7}}. Module ea electrode ea platinum e etselitsoe bophelo bo bolelele ba tšebeletso, e nang le tlhokomelo e fokolang e hlokahalang ha e bapisoa le li-electrode tsa tšepe. Maemo a RS485 Modbus-Puisano ea RTU, bokhoni bo matla ba ho sitisa motlakase, e tsamaellanang le litsamaiso tse kholo tsa tlhahlobo ea indasteri.
Tekheniki Parameters
|
Tekanyo Range |
0.00-200.0mS |
|
Qeto |
0.01uS .1uS1uS.1mS(ho itšetlehile ka mefuta e fapaneng) |
|
Ho nepahala |
±2%F.S. |
|
Mokhoa oa Matšeliso a Mocheso |
Mocheso o itekanetseng |
|
Boemo ba Tekanyo ea Mocheso |
-10.0 ~ 110.0 tekanyo |
|
Mocheso oa ho sebetsa |
0 ~ 60 likhato |
|
Coefficient ea Matšeliso a Mocheso |
0.0 ~ 10.0% e ka lokisoang |
|
Reference Mocheso |
15.0 ~ 35.0 likhato tse lokisehang |
|
Conductivity Electrode Constant |
0.01,0.1,1,10.0 e ka hlophisehang |
|
Khatello |
0~4bar |
Litekanyo tsa 'Mele le Litšobotsi tsa Motlakase
1.Conductivity K=1, K=10, K=0.1, K=0.01 li entsoe ka thepa ea PPS (e ka tloaeleha)
2.3/4- likhoele tse ka pele le tse ka morao bakeng sa ho kenya habonolo sebakeng sa marang-rang.
Lithapo tsa matla tsa 3.2 le mela ea matšoao a 2 RS-485.
Phepelo ea motlakase ea 4.12-24V DC, e nang le mefuta e fapaneng ea ho feto-fetoha ha matla ea ± 10% le 2000V ka thoko.
Conductivity Digital Electrode
Likarolo tsa Sehlahisoa
1.Moqapi oa ho fana ka matla le tlhahiso ea ho itšehla thajana ho netefatsa polokeho ea motlakase
2.E hahiloe-ka har'a li-circuits tsa ts'ireletso ka har'a phepelo ea motlakase le likhokahano, e nang le bokhoni bo matla ba ho thibela{2}}tšitiso
3.Ho amohela moralo o felletseng oa ts'ireletso ea potoloho, ho nolofalletsa ts'ebetso e tšepahalang ntle le tlhokahalo ea lisebelisoa tse eketsehileng tsa ho itšehla thajana
4.Potoloho e hahiloe ka har'a electrode, e hlahisang mamello e ntle ea tikoloho le ho kenya le ho sebetsa habonolo
5.RS-485 transmission interface, MODBUS-RTU communication protocol, e tšehetsang puisano ea batho ba babeli le ho amohela litaelo
6.Protocol ea puisano e bonolo, e sebetsa, ebile e bonolo haholo ho e sebelisa
7.Outputs boitsebiso bo bongata ba tlhahlobo ea electrode, ho etsa hore e be bohlale haholoanyane
8.E hahiloe-ka har'a memori ea ka hare, e ka bolokang litekanyo tse bolokiloeng le ho seta tlhahisoleseling le kamora ho tima motlakase.
Sesebelisoa sa Sehlahisoa
Hot Tags: polatinamo-motlakase oa conductivity ea lisele, China platinum-baetsi ba probe ea cell conductivity, feme
