Ts'ebetso ea pH sensor e etselitsoe tlhahlobo e tsoelang pele ea pH ea marang-rang lits'ebetsong tsa tlhahiso ea indasteri. E amohela-likhemikhale tse phahameng-membrane ea khalase e sa sebetseng hantle, e tsitsitseng khahlanong le li-acids, alkalis le mecha ea litaba e tloaelehileng ea indasteri. Sebopeho se matlafalitsoeng, se thibelang-scaling le{5}}tšusumetso, se ka tšeptjoang tlas'a phallo, ho sisinyeha le khatello e nyane.

E hahiloe ka-ka matšeliso a itekanetseng a mocheso. Moralo o ka tlase ho metsi oa IP68 o nang le khoele e tloaelehileng ea 3/4" NPT bakeng sa liphaephe, tanka le ho kenya mochini oa mochini. Ho khetha 4–20mA analog kapa RS485 Modbus-Sehlahisoa sa RTU, se kopantsoeng habonolo le lilaoli, PLC le litsamaiso tsa othomathike. Tlhokomelo e tlase, e loketse ts'ebetso ea 24/7.

MTW-APH2521 Process pH Sensor e etselitsoe ho lekola pH ka linako tsohle ho liphaephe tsa tlhahiso ea indasteri le lisebelisoa tsa tšebetso. Ka moralo o ntlafalitsoeng oa sebopeho, e ikamahanya le ts'ebetso ea inline mme e sebetsa ka mokhoa o tsitsitseng tlasa phallo e mahareng, khatello le liphetoho tse tloaelehileng tsa mocheso.

Sensa ena e sebelisa-galase e sa sebetseng hantle le seseteme ea litšupiso e tšoarellang nako e telele, e nang le moea o fokolang, o arabelang kapele le bokhoni bo matla ba ho thibela{1}}ho senya. E hahelletsoeng{{3}ka puseletso ea mocheso e tiisa hore ho bala ka nepo nakong eohle ea ts'ebetso e telele{4}e tsoelang pele.

E tiisitsoe ka botlalo ka kereiti e sa keneleng metsi ea IP68, e tsamaellana le li-transmitters tse fapaneng tsa pH, li-control le li-automation system tsa indasteri. Ho kenngoa ha bonolo le tlhokomelo e tlaase li finyella litlhoko tsa lihora tse 24 tse sa sitisoeng tsa ts'ebetso ea ts'ebetso.

E sebelisoa haholo mekhoeng ea tlhahiso ea indasteri, liphaephe tsa ho hloekisa metsi, phallo ea ts'ebetso ea lik'hemik'hale, tsamaiso ea metsi a potolohang le ho hlahloba ts'ebetso ea metsi a litšila a indasteri.

Melemo ea Bohlokoa

Boemo ba indasteri, bo etselitsoeng- tlhahlobo ea nako e telele
Acid e ntle & khanyetso ea alkali, ho ikamahanya le maemo a mecha ea litaba
Khahlanong-le tšusumetso le{1}}khahlanong le{1}}litšila, ikamahanya le maemo a matla a phallo
Liphetho tse ngata tsa matšoao bakeng sa ho tsamaisana le sistimi e feto-fetohang
Ho kenya habonolo, ho hloekisa habonolo le ho lekanya
Ts'ebetso e tlase, e tsitsitseng bakeng sa tlhahiso e tsoelang pele

Tekheniki Parameters

Paramethara	Range/Mofuta
Tekanyo Range	0-14 pH
Mocheso Range	0-100 likhato
Khatello Range	0–3 Bar, 6 Bar MAX
Matšeliso a Mocheso	NTC 2.252K, NTC 10K, NTC 22K, NTC 30K, PT100, PT1000, joalo-joalo (e khethiloeng)
Moepa oa Fektheri	>95%
Membrane Resistance	<250 MΩ
Zero Monyetla	7 ± 0.25 pH
Nako ea Karabelo	<30 S
Mofuta oa Salt Bridge	Mokotla o khethehileng oa porous ceramic
Mofuta oa Litšupiso	Referense ea borokho ba letsoai habeli
Palo ea Likopano	Tse peli
Mounting Thread	PG13.5
Thepa ea Matlo	Khalase
Botebo ba ho Kena	120/150/225/325/425 limilimithara (ka tloaelo)
Khokahano ea Cable	S8/S8M/S7/VP/K8S/K2, joalo-joalo (e ka khonahala)